Velcro Strap Instructions

Click on the image to enlarge it

How to wear a Velcro Strap

1. To change your strap to a Velcro strap you will need a changing tool 1) To change your strap to a Velcro strap you will need a changing tool 2. Loop the longer length of the strap through the watch 2) Use the changing tool to remove your current strap on both sides 3. Pull it through the back of the watch 3.) Place your 2 pins in a safe place not to loose them
4. Loop it through the other end of the watch 4) Lay down your Velcro strap with the Luminox Logo at the top 5. Pull the strap way back until the watch is near the strap keeper 5) Place the pin under the elastic material

6. Pull the longer end through the strap loop at the other side 6) Then fasten the watch head to the pin using your changing tool
7. Pull the whole of its length through it 7) Place the second pin on the other side of the watch head and fasten it to the strap

8. Pull the strap back so it is tight to the watch 8) To attach the watch to your wrist loop the end part of the strap through the loop and close 9. Put the watch around your wrist and feed the strap through its buckle 9) Put the watch around your wrist